Ecoxgear TWCCDRW: Tunewriter II User Manual download pdf (Page 32)

STEP 6:

If PHONO is selected in step 1, gently

lower the tone arm onto the edge of the

record (or the track to be recorded).

If AUX is selected in step 1, play the source

to be recorded.

When the playback of the source has been

ﬁnished, press the STOP ( ) button

to stop recording.

When the rotation of the turntable stops, the recording will stop automatically. But to

prevent unwanted noise from the tone arm being recorded, stop the recording manually by

using the STOP button.

STEP 7: START RECORDING

Press the PLAY/ PAUSE button to start recording.

To stop recording

Press the STOP button to stop recording. e

display will show “Busy”, after the “Busy” disappears,

press the CD button and, the display will show the

record track time.

STEP 5: SELECT RECORDING LEVEL (optional)

If necessary, adjust the recording level using the REC LEVEL knob , the display will

show from 00 to 79.

Play the source to be recorded and adjust the recording level so that the loudest sound does

not exceed the “OVER” indicator on the peak level meter.

To suspend recording temporarily (pause mode)

Press the PLAY/PAUSE button. “Busy” brieﬂy appears on the

display, and the recording is paused.

To restart recording, press the PLAY/PAUSE button again.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

No comments

Ecoxgear TWCCDRW: Tunewriter II User Manual Page 32