Ecoxgear IRMS300: MicroSystem User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
14
Scanning
IIIIIIIIIIIIIIIIIII
IF the radio does not find a wireless network router, the display will show:
No networks
Found
If this happens after subsequent attempts you should setup your wireless access point working - see the
instructions supplied with your wireless network.
When MICRO SYSTEM finds your wireless network, the display will show ESS-ID for the access point
on the screen - this name is the name ascribed to the access point by the person who set up the
network - for example:
< My Home Network >
It is possible, and in some locations highly likely, that your radio will find more than one wireless access
point, in which case you can choose which one you want to connect to. Turn the knob on your radio to
see the ESS-ID for each access point your radio has found.
For optimal performance you may want to check your home network settings to make sure your radio is
on a deferent channel than your neighbors. To do this please consult your Wi-Fi router owners manual
Step 3 - Connect to the wireless network
When the ESS-ID for the access point you want to connect to is displayed on the screen, press OK.
IF your network is not configured to require an encryption code, the screen should display:
Connecting to
Network
then:
Page view 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 34 35

Comments to this Manuals

No comments